Specification
| Cisco Switch new | |
|---|---|
| Specification | Capacity in Millions of Packets per Second (mpps) (64-byte packets): 95.23 Switching Capacity in Gigabits per Second (Gbps): 128.0 Total System Ports: 24 Gigabit Ethernet +, 4 x 10G RJ-45 Ports: 24 x Gigabit Ethernet Combo Ports (RJ45 + Small form-factor pluggable [SFP]): 4 x SFP+ Packet Buffer: 1.5 MB Unit dimensions (W x D x H): 445 x 345 x 44 mm (17.5 x 13.59 x 1.73 in) |
| Layer 3 | IPv4 routing: Wirespeed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing: Wirespeed routing of IPv6 packets Layer 3 Interface: Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface Classless Interdomain Routing (CIDR): Support for classless interdomain routing RIP v2: Support for Routing Information Protocol version 2 for dynamic routing Policy-Based Routing (PBR): Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL) DHCP Server: Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options DHCP relay at Layer 3: Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay: Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets |
| Quality of Service | Priority levels: 8 hardware queues Scheduling: Strict priority and Weighted Round-Robin (WRR) Rate limiting: Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing Congestion avoidance: A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization iSCSI traffic optimization: A mechanism for giving priority to iSCSI traffic over other types of traffic |
| Green (power efficiency) | Energy Detect: Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up Cable length detection: Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables. EEE Compliant (802.3az): Supports IEEE 802.3az on all copper Gigabit Ethernet ports Disable port LEDs: LEDs can be manually turned off to save on energy Time-based port operation: Link up or down based on user-defined schedule (when the port is administratively up) Time-based PoE: PoE power can be on or off based on user-defined schedule to save energy |
| Environmental | Storage temperature: -13° to 158°F (-25° to 70°C) Operating humidity: 10% to 90%, relative, noncondensing Storage humidity: 10% to 90%, relative, noncondensing Warranty: Limited lifetime with next business day advance replacement (where available) |
| General | Jumbo frames: Frame sizes up to 9K bytes. The default MTU is 2K bytes MAC table: 16K addresses |
| Hardware | USB slot: USB Type-A slot on the front panel of the switch for easy file and image management Buttons: Reset button Cabling type: Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T LEDs: System, Link/Act, PoE, Speed Flash: 256 MB CPU: 800 MHz ARM DRAM: 512 MB |
| Package Contents | Cisco Business 350 Series Managed Switch Power Cord (Power adapter for select 8-port and 16-port SKUs) Mounting Kit Quick Start Guide |
| Minimum Requirements | Web browser: Chrome, Firefox, Edge, Safari Category 5e Ethernet network cable TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed |




